Sinks. Sunday , October 08th , 2017 - 22:42:16 PM
Installing your new bar sink can be fairly simple, or very elaborate. It all has to do with the type of sink you purchase. If you decided to add a drop in type sink, as long as you already have the right sized hole in the counter top, the installation is pretty simple. If you have decided on an undermount sink, installation can be a lot trickier.
At this point everything that holds the sink in place will have been removed. Make sure you have carefully stored the pipes and clips you used as some of them may come in handy when installing the new sink. Lift the sink directly from the counter-top and place it in your garage or store room. You may need to do some cleaning on the area that is beneath the sink rim before you install a new sink.
The very first step you need to take is to turn off the water for your kitchen. Once you’re sure you won’t unleash a flood, you’ll need to disconnect the old sink from the kitchen plumbing. Get under your sink and familiarize yourself with which pipes go where. You may want to draw a simple outline for reference. Then you will simply need to methodically unhook the waste lines and feed lines from the existing sink. Have a bucket and some towels handy; there will be some drainage.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does Louisvilleparenting claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.