travel. Sinks. August 12th , 2017.
And that’s all there is to it! Even a beginner, with a little confidence, can accomplish this quick switch in one day or less. Ask a professional for help if you get stuck and need help, but you should be able to accomplish this upgrade with only a few tools and supplies and a bit of elbow grease.
At this point everything that holds the sink in place will have been removed. Make sure you have carefully stored the pipes and clips you used as some of them may come in handy when installing the new sink. Lift the sink directly from the counter-top and place it in your garage or store room. You may need to do some cleaning on the area that is beneath the sink rim before you install a new sink.
Make sure you have aligned and measured the clips to their mate which is on the underside of the sink. Next, you should attach them to the underside of the counter-top and drive each nut into place. Some of the sinks manufactured today are made from enamel cast-iron or porcelain. These are classified as self-rimming as they usually rest on the source of the counter-top meaning they do not need clips. Though such models are simple to install they have a raised edge that does not allow you to clean debris from the counter-top directly to the sink. Apply a silicone sealant before lowering the sink into position. Reconnect the disposal, trap and supply, and then turn on the water supply. Test the taps ensuring they are operating properly. Wait for a few hours allowing the silicone sealant to dry completely before cleaning up.
There are five main types of bathroom sinks that you can choose from for your bathroom. Each one is better suited to different types of bathrooms. You need to think about who will be using the bathroom, how big the bathroom is, and your decorating style to help you choose the appropriate sink. The five types are vanity sinks, pedestal sinks, vessel sinks, console sinks, and wall mounted sinks.
With a top mount sink, you basically just need a hole in the counter that the sink will drop into. This type of sink has a flange, or lip, that runs all the way around the sink and sits on top of the counter top. Because this flange overhangs the counter, the edge of the hole does not have to be finished. In fact, if the hole is kind of ragged, no one will ever know as long as you use a top mounted sink. The sink is then fastened from below the counter with screws and small plates that hold the sink in place.
Any content, trademark’s, or other material that might be found on the Louisvilleparenting website that is not Louisvilleparenting’s property remains the copyright of its respective owner/s. In no way does Louisvilleparenting claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.